• signs in china Home
  • |
  • Entra o registrate
  • |
  • Mi cuenta
  • |
  • Live Chat
Tel：+502 33657004/22338371/58321280
Todos los departamentos
Inicio > Equipos para Publicidad > Channel Sign and Lightbox Making Equipment > Maquina para Muescas y Letras > 27"(700mm) Acrylic Plastic PVC Bending Machine Heater for Lightbox, Showcase/Display Case, 220V
27"(700mm) Acrylic Plastic PVC Bending Machine Heater for Lightbox, Showcase/Display Case, 220V
  • 27"(700mm) Acrylic Plastic PVC Bending Machine Heater for Lightbox, Showcase/Display Case, 220V
  • 27"(700mm) Acrylic Plastic PVC Bending Machine Heater for Lightbox, Showcase/Display Case, 220V
  • 27"(700mm) Acrylic Plastic PVC Bending Machine Heater for Lightbox, Showcase/Display Case, 220V
  • 27"(700mm) Acrylic Plastic PVC Bending Machine Heater for Lightbox, Showcase/Display Case, 220V
  • 27"(700mm) Acrylic Plastic PVC Bending Machine Heater for Lightbox, Showcase/Display Case, 220V
  • 27"(700mm) Acrylic Plastic PVC Bending Machine Heater for Lightbox, Showcase/Display Case, 220V
  • 27"(700mm) Acrylic Plastic PVC Bending Machine Heater for Lightbox, Showcase/Display Case, 220V
  • 27"(700mm) Acrylic Plastic PVC Bending Machine Heater for Lightbox, Showcase/Display Case, 220V
  • 27"(700mm) Acrylic Plastic PVC Bending Machine Heater for Lightbox, Showcase/Display Case, 220V
  • 27"(700mm) Acrylic Plastic PVC Bending Machine Heater for Lightbox, Showcase/Display Case, 220V
  • 27"(700mm) Acrylic Plastic PVC Bending Machine Heater for Lightbox, Showcase/Display Case, 220V
  • 27"(700mm) Acrylic Plastic PVC Bending Machine Heater for Lightbox, Showcase/Display Case, 220V
  • 27"(700mm) Acrylic Plastic PVC Bending Machine Heater for Lightbox, Showcase/Display Case, 220V
  • 27"(700mm) Acrylic Plastic PVC Bending Machine Heater for Lightbox, Showcase/Display Case, 220V

Ver imagen más grande y otras vistas (con zoom)

27"(700mm) Acrylic Plastic PVC Bending Machine Heater for Lightbox, Showcase/Display Case, 220V

for bending Acrylic, Plexi glass, PVC, PC, ABS, PP etc. Applicable thickness is 0.3-10mm.

(5 Reseñas)   |   195 Transacciones

Codigo del articulo:ABM-PZ-700

Buyer Protection


27"(700mm) Acrylic Plastic pvc bending machine Heater for Lightbox, Showcase/Display Case (with Infrared Ray Calibration, 0.3-10mm Thickness, 220V)
for bending Acrylic, Plexi glass, PVC, PC, ABS, PP etc. Applicable thickness is 0.3-10mm.
Description:
The acrylic bending machine is an equipment which can softens and bends materials such as acrylic, organic plate, PVC, etc and other various thermoplastic materials into shapes by heating. It is widely applied.
Features:
• Humanized design, easy operation, and convenient use.
• Big worktable, boot without other assistance.
• Advanced infrared heating technology with circulating water cooling system, adjustable temperature.
• Adjustable heating surface of material, with scale to guarantee heating surface’s accuracy, conformity, ensure good bending effect.
• Evenly heated, instantly shaped, no deformation, no scorch, no foaming.

• Instant forming, temperature adjustable; Water circulating cooling system equipped;

•  Far infrared heating, possible to bend for different angles;

•  Equipped with water circulating cooling pump and water hose;

•  Temperature adjustable 0-600℃, heating width adjustable 0-20mm;

•  Backside cooling fan.

Functions:
Acrylic Bending Machine is also called plastic plate bending machine, soften and bend the plastic plate by heating.
Component function:

1. Water input joint
2. Water output joint
3. Power plug
4. Protective tube
5. Heating switch
6. Temperature controller
7. Heating surface controller

1. Put the main machine on a stable table
2. Insert the plug.
3. Insert two water tubes, one end of tube with copper insert stick into the water pump. The other head of both tube stick into the copper joints on the main machine.
As below:

4. 20L volume bucket or water tank, fill up with water, fix the water pump to the bottom of bucket/ tank. As below:
Operation:
1. Insert the plugs of water pump and main machine, turn on heating switch. The heating rod starts heating, cooling water starts to circulate.
2. Adjust the proper temperature according to the plate material and thickness, also adjust the heating surface controller gap to appropriate size.
3. Wait until the heating tube get red, put the material onto the worktable to heat, make sure the material just above the heating tube.
4. Bend the soft material promptly to any angle you want, cool for a while.
5. Finish, turn off the heating switch, then the pump.
FAQ:
Problem 1: No heating
Fault: Check whether the power works or not.
Solution: Make sure the power on.
Fault: Whether the temperature controller is in lowest or not.
Solution: Adjust the temperature controller to a high scale.
Fault: Whether the protective tube is intact or not.
Solution: Replace the protective tube.
Problem 2: Can not pump the water
Fault: Whether the pump has electric to work or not.
Solution: Replace the damaged pump.
Fault: Whether there is much air in the tube.
Solution: Fill up two tubes with water, dip the pump into water.
Applicable Materials:
Plastic plate: Acrylic, Plexi glass, PVC, PC, ABS, PP etc..

This Acrylic Plastic PVC Bending Machine is increasingly used in school technological innovation course, decoration projects, packing of square columns or wall corners, fish tank, window edge, display counter, supermarket shelves, advertising light box, art products making, etc.
Decoration industry: Acrylic bending side, acrylic display rack, acrylic decoration bending, etc.
Industry: safety guard on machinery, protective cover for production line, production line exhibition stand, storage box, etc.


1. I don’t know this website well, how can I trust you?
2. Not clear about the Price Policy of Sign-in-China.com?
3. How to pay? Can I use credit card?
4. Is it safe to pay online? Will it occur any security problems concerning my personal information?
Mensaje rápido para este producto
27"(700mm) Acrylic Plastic PVC Bending Machine Heater for Lightbox, Showcase/Display Case, 220V

27"(700mm) Acrylic Plastic PVC Bending Machine Heater for Lightbox, Showcase/Display Case, 220V

$288 - 384/set

Min. Order : 1 set
  • *Correo de empresa:
  • *Nombre:
  • Telefono:
  • +86(10) 6370-5868
  • *Mensaje:
  • caracteres:20(Min.) - 2000(Max.)
  • *Codigo de Verificacion:

Envio :
Enviamos a más de 200 países y 300 puertos de todo el mundo!
Por expreso: 3-5 días hábiles
Por mar: 20-60 días hábiles
¿Cuánto para que enviar a
mi casa?
Pago:
T/TTransferencia Bancaria :
:
:

Guía de vídeo :

MAs vendidos

Categorias Relacionadas

Acrylic Finishing Machine Metal Profile Making Machine Auto Metal Letter Bender Channel Letter Making Tools Auto Metal Letter Bender

a más personas también les gusta los siguientes productos

Suscribase para obtener ofertas especiales

Recibe gratis actualizaciones, descuentos y ofertas especiales para ganar productos gratis y premios en efectivo

Encontrar mas>>

Mira nuestras promociones de esta semana.

UPS TNT FEDEX DHL NETSUITE PAYPAL PEIAC
ISA SGIA

www.sign-in-guatemala.com. es el mayor proveedor en línea de productos de publicidad en el mundo y especializados en el suministro de una solución integral para los clientes al seleccionar equipos de Publicidad, materiales de consumo articulos publicitarios, productos de publicidad, etc. También el centro de servicio en el extranjero autorizado por la Asociación China de impresión, de inyección de tinta, para lo cual hemos establecido sucursales en el extranjero, en 6 países extranjeros con el fin de brindar un mejor servicio a nuestros clientes en todo el mundo. Nuestros productos cubren todo el campo de la Publicidad y la señalización y todos los productos que suministramos se hacen de conformidad con las normas internacionales de calidad, como resultado de que, en la actualidad, tenemos más de 9000 productos en línea para la venta. Desde que implementamos la compra centralizada, todos los productos se cotizan a precios competitivos.